Table of Contents
Advertisement
After installing CF-SPARKER and making gas connections,
verify that all connections are tight and that no leaks are
present using a solution of soapy water or a commercially
Position Your Tank
1. Connect the propane hose/regulator to the propane tank and
hand tighten (DO NOT USE A WRENCH) and slide the propane
tank past the dotted line to ensure the Access Door closes
properly. Attach the Access Door.
2. With the tank inside, ensure that no hoses, wires, or any other
components are kinked or touching the burner pan.
available leak-check solution.
(if applicable)
11
Advertisement
Table of Contents
