Table of Contents
Advertisement
®
R&S
NRQ6
If you supply the local oscillator signal externally, you can use an external signal
as sampling clock instead of the internal signal (input).
For input and output specifications, read the label on the R&S NRQ6 casing and
the data sheet.
Further information:
● For details on configuration, see the user manual.
4.8
Local oscillator I/O (LO)
See (8) in
Figure
The female SMA connector is used as an input or output for the local oscillator
(LO) signal.
For input and output specifications, read the label on the R&S NRQ6 casing and
the data sheet.
Further information:
● For details on usage and configuration, see the user manual.
4.9
Fan openings
See (9, 10) in
Figure
The R&S NRQ6 has fan openings on the top and on the bottom of the casing.
When connecting the R&S NRQ6, be careful to allow sufficient airflow as speci-
fied in
"Allow sufficient airflow"
Getting Started 1178.3705.02 ─ 10
4-1.
4-1.
on page 16.
R&S NRQ6 tour
Fan openings
36
Advertisement
Table of Contents
