Table of Contents
Advertisement
Special features in the programme sequence
Final spin speed
Interim spin
Omitting the final
spin (Rinse hold)
Anti-crease
50
Spinning
When a programme is selected, the maximum spin speed for this
wash programme is shown in the display.
You can reduce the final spin speed.
However, you cannot select a final spin speed higher than that shown
in the chart.
There is a spin cycle after the main wash and between the rinses. A
reduction in the final spin speed will also reduce the interim spin
speed as appropriate.
Select the Rinse hold Extra and then the Drain programme. After the
last rinse, the water will be pumped away and the Anti-crease
phase will switch on.
At the end of the programme, the drum continues to turn at intervals
for up to 30 minutes to help prevent creasing. The washing machine
can be opened at any time.
There is no anti-crease phase at the end of some programmes.
Advertisement
Table of Contents
