Installing The Intrusion Switch; Hard Drive And Optical Drive Module; Removing The Hard Drive And Optical Drive Module - Dell OptiPlex 3050 Small Form Factor Owner's Manual

b Slide the intrusion switch and lift it away from the computer [3].

Installing the intrusion switch

1 Insert the intrusion switch into the slot on the chassis.
2 Connect the intrusion switch cable to the system board.
3 Install the:
a fan shroud
b cover
4 Follow the procedure in

Hard drive and optical drive module

Removing the hard drive and optical drive module

1 Follow the procedure in
2 Remove the cover.
3 To release the hard drive and optical drive module:
a Disconnect the data and power cables from the connectors on the hard drive assembly [1] [2].
b Unroute the cables through the clip [3].
c Slide the release tab to unlock the hard drive and optical module [4].
After working inside your computer.
Before working inside your computer.
Removing and installing components 17