Processor; Removing Processor - Dell OptiPlex 3050 Small Form Factor Owner's Manual

3 Connect the heat sink assembly cable to the system board.
4 Install the:
a fan shroud
b bezel
c cover
5 Follow the procedure in

Processor

Removing processor

1 Follow the procedure in
2 Remove the:
a cover
b 2.5–inch drive assembly
c Optical drive
d fan shroud
e heat sink
3 To remove the processor:
a Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b Lift the lever upward and lift the processor shield [2].
c Lift the processor out of the socket [3].
After working inside your computer.
Before working inside your computer.
Removing and installing components 23