Installing The Fan Shroud; Front Bezel; Removing Bezel - Dell OptiPlex 3050 Small Form Factor Owner's Manual

Installing the fan shroud

1 Align the fan shroud, with both tabs on the heat sink.
2 Insert the fan shroud until it clicks into place.
3 Install the cover.
4 Follow the procedure in

Front Bezel

Removing bezel

1 Follow the procedure in
2 Remove the cover.
3 To remove the front bezel:
a Lift the tabs to release the front bezel from the computer [1].
b Remove the front bezel from the computer [2].
14 Removing and installing components
After working inside your computer.
Before working inside your computer.