Identifying The Card In Your System - Nvidia ConnectX-6 Dx User Manual

Ethernet adapter cards for ocp spec 3.0

Hide thumbs Also See for ConnectX-6 Dx:

Table of Contents

After plugging in a cable, lock the connector using the latching mechanism particular to the

cable vendor. When a logical connection is made, Green LED1 will light. When data is being

transferred, Green LED1 will blink.

Care should be taken so as not to impede the air exhaust flow through the ventilation holes.

Use cable lengths that allow for routing horizontally around to the side of the chassis before

bending upward or downward in the rack.

To remove a cable, disengage the locks and slowly pull the connector away from the port

receptacle. The LED indicator will turn off when the cable is unseated.

Identifying the Card in Your System

On Linux

Get the device location on the PCI bus by running lspci and locating lines with the string "Mellanox

Technologies":

lspci |grep -i Mellanox

Network controller: Mellanox Technologies MT28800 Family [

On Windows

Open Device Manager on the server. Click Start => Run, and then enter devmgmt.msc.

Expand System Devices and locate your NVIDIA ConnectX-6 Dx adapter card.

Right-click the mouse on your adapter's row and select Properties to display the adapter card

properties window.

Click the Details tab and select Hardware Ids (Windows 2012/R2/2016) from

the Property pull-down menu.

PCI Device (Example)

Arrow.com.

Downloaded from

ConnectX-6 Dx

]

Table of Contents