OCP 3.0 Bracket Replacement Instructions
Unable to render include or excerpt-include. Could not retrieve page.
OCP 3.0 Adapter Card Installation Instructions
This section provides detailed instructions on installing your adapter card in a system. The below
table lists the different ConnectX-6 Dx OCP 3.0 retention mechanisms and offers direct links to
installation instructions per bracket type.
Thumbscrew (Pull-tab) Bracket
Internal-Lock Bracket
Ejector-Latch Bracket
Please note that the following figures are for illustration purposes only.
Cards with Thumbscrew (Pull-tab) Bracket
1.
Before installing the card, ensure the system is off, and the power cord is not connected to
the server. Please follow proper electrical grounding procedures.
2.
Open the system case.
3.
Align the card with the system rails.
4.
Push the card until connectors are in full mate.
5.
Turn the captive screw clockwise until firmly locked.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Retention Mechanism
Installation Instructions
Installation Instructions for Cards with Thumbscrew (Pull-
tab) Bracket
Installation Instructions for Cards with Internal Lock
Installation Instructions for Cards with Internal-Lock Bracket
23