Identifying The Card In Your System - Nvidia MCX621102AC-ADAT User Manual

Connectx-6 dx ethernet adapter cards

Hide thumbs Also See for MCX621102AC-ADAT:

Table of Contents

After plugging in a cable, lock the connector using the latching mechanism particular to the

cable vendor. When data is being transferred the Green LED will blink.

Interface under the Interfaces section.

Care should be taken as not to impede the air exhaust flow through the ventilation holes. Use

cable lengths that allow for routing horizontally around to the side of the chassis before

bending upward or downward in the rack.

To remove a cable, disengage the locks and slowly pull the connector away from the port

receptacle. The LED indicator will turn off when the cable is unseated.

Identifying the Card in Your System

On Linux

Get the device location on the PCI bus by running lspci and locating lines with the string "Mellanox

Technologies":

lspci |grep -i Mellanox

Network controller: Mellanox Technologies MT2892 Family

On Windows

Open Device Manager on the server. Click Start => Run, and then enter devmgmt.msc.

Expand System Devices and locate your ConnectX-6 Dx adapter card.

Right click the mouse on your adapter's row and select Properties to display the adapter card

properties window.

Click the Details tab and select Hardware Ids (Windows 2012/R2/2016) from

the Property pull-down menu.

PCI Device (Example)

[ConnectX-6

Dx]

See LED

Table of Contents