Smbus Interface - Nvidia ConnectX-6 Dx User Manual

Link Indications
1Hz blinking Yellow
4Hz blinking Yellow
LED0 -
Link Speed
LED1 -
Activity
FRU EEPROM
FRU EEPROM allows the baseboard to identify different types of Mezzanine cards. FRU EEPROM is
accessible through SMCLK and SMDATA. FRU EEPROM address is defined according to SLOT_ID0 and
SLOT_ID1, and its capacity is 4Kb.

SMBus Interface

ConnectX®-6 Dx technology maintains support for manageability through a BMC. ConnectX®-6 Dx
OCP 3.0 adapter can be connected to a BMC using MCTP over SMBus or MCTP over PCIe protocols as
if it is a standard NVIDIA OCP 3.0 adapter. For configuring the adapter for the server's specific
manageability solution, please contact NVIDIA Support.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
LED and State Description
Beacon command for locating the adapter card
Indicates an error with the link. The error can be one of the
following:
Error Type Description
2
2
I C access to the
I C
networking ports fails
Over-current condition
Over-current
of the networking
ports
• A constant Green indicates a link
networking speed.
• A constant Yellow indicates a link
maximum networking speed.
• If LED0 is off, then the link has not been established.
• A blinking Green indicates a valid link with data
transfer.
• If LED1 is off, then there is no activity
LED Behavior
Blinks until the error
is fixed
Blinks until the error
is fixed
with the maximum
with less than the
18