Voltage Regulators; Cpld Interface; Heatsink - Nvidia ConnectX-6 Dx User Manual

Ethernet adapter cards for ocp spec 3.0

Hide thumbs Also See for ConnectX-6 Dx:

Table of Contents

Voltage Regulators

The voltage regulator power is derived from the OCP 3.0 edge connector 12V and 3.3V supply pins.

These voltage supply pins feed onboard regulators that provide the necessary power to the various

components on the card.

CPLD Interface

The adapter card incorporates a CPLD device that controls the networking port LEDs and the scan

chain. It draws its power supply from 3.3V_EDGE.

A heatsink is attached to the ConnectX®-6 Dx IC to dissipate the heat. It is connected by four spring-

loaded push pins that insert into four mounting holes.

ConnectX®-6 Dx IC has a thermal shutdown safety mechanism that automatically shuts down the

ConnectX®-6 Dx card in case of a high-temperature event, improper thermal coupling, or heatsink

removal.

Arrow.com.

Downloaded from

Table of Contents