Pre-Installation Checklist; Ocp 3.0 Bracket Replacement Instructions; Ocp 3.0 Adapter Card Installation Instructions; Cables And Modules - Nvidia ConnectX-6 User Manual

Lx ethernet adapter cards for ocp spec 3.0

Hide thumbs Also See for ConnectX-6:

Table of Contents

It is strongly recommended to use an ESD strap or other antistatic devices.

Pre-Installation Checklist

Unpack the ConnectX-6 Lx adapter card.

Unpack and remove the ConnectX-6 Lx card. Check the parts for visible damage that may have occurred during shipping. Please note that the cards

must be placed on an antistatic surface.



Please note that if the card is removed hastily from the antistatic bag, the plastic ziplock may harm the EMI fingers on the networking

connector. Carefully remove the card from the antistatic bag to avoid damaging the EMI fingers.

Shut down your system if active:

Turn off the power to the system, and disconnect the power cord. Refer to the system documentation for instructions. Before you install the

ConnectX-6 Lx card, make sure that the system is disconnected from power.

Unable to render include or excerpt-include. Could not retrieve page.

Unable to render include or excerpt-include. Could not retrieve page.

Cable Installation

All cables can be inserted or removed with the unit powered on.

To insert a cable, press the connector into the port receptacle until the connector is firmly seated.

Table of Contents