Nikon Z8 User Manual page 483

Adding a Shoe-Mounted Flash Unit
Radio-controlled flash units (
the following flash units mounted on the camera accessory shoe:
SB‑5000: Before attaching the flash unit, set it to radio-controlled
master flash mode (a d icon will appear at the top left corner
of the display) and choose group or remote-repeating flash
control. Once the unit is attached, settings can be adjusted from
the camera menus or using the controls on the SB‑5000. In the
case of the camera menus, use the options listed under [Group
flash options] > [Master flash] or under [M] in the [Remote
repeating options] display.
SB‑910, SB‑900, SB‑800, SB‑700, SB‑600: Configure the flash for
standalone use. Use the controls on the flash unit to adjust flash
settings.
SB‑500, SB‑400, SB‑300: Mount the unit on the camera. Adjust
settings using the [Group flash options] > [Master flash] item
in the camera menus.
399) can be combined with any of
0
409
Radio AWL