Nikon Z8 User Manual page 355

4
Choose the start point.
To create a copy that begins from the current frame, highlight
[Start point] and press J.
5
Confirm the new start point.
If the desired frame is not currently displayed, press 4 or 2
to advance or rewind a frame at a time.
Rotate the main command dial one stop to skip ahead or
back 10 frames.
Rotate the sub-command dial one stop to skip ahead or
back 10 s.
6
Choose the end point.
Press the center of the sub-selector to switch to the end-point
selection tool (x) and then select the closing frame (x) as
described in Step 5.
7
Press 1 to create the copy.
281
Trimming Videos