Nikon Z8 User Manual page 387

D
Windows
Some computers may be configured to display an AutoPlay prompt
when the camera is connected.
Click the dialog and then click [Nikon Transfer 2] to select Nikon
Transfer 2.
D
macOS
If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch
Image Capture (an application that comes with macOS) and select Nikon Transfer 2 as the application
that opens when the camera is detected.
D
Caution: Transferring Videos
Do not attempt to transfer videos from the memory card while it is inserted in a camera of a different
make or model. Doing so could result in the videos being deleted without being transferred.
D
Cautions: Connecting to Computers
Do not turn the camera off or disconnect the USB cable while transfer is in progress.
Do not use force or attempt to insert the connectors at an angle. Be sure also to keep the
connectors straight when disconnecting the cable.
Always turn the camera off before connecting or disconnecting a cable.
To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
D
USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard.
Connect the camera to a pre-installed USB port.
313
Computers: Connecting via USB