Nikon Z8 User Manual page 456

9
Highlight [Master/remote] and press 2.
Choose a role for each camera from "master" and "remote".
[Master camera]: Pressing the shutter-release button on the
master camera releases the shutters on the remote cameras.
Each group can have only one master. If the group has
multiple master cameras, only the first to connect to the
network will actually serve in that capacity.
[Remote camera]: The shutters on the remote cameras are
synchronized with the shutter on the master camera.
10
Repeat Steps 3 through 9 for the remaining cameras.
To configure another Z 8 for use as a remote camera, repeat Steps 2 through 9.
When configuring remote cameras, be sure to select [Remote camera] in Step 9.
11
On the master camera, highlight [Remote camera list] and
press 2.
Cameras assigned the remote camera role in Step 9 are added
to the master camera's remote camera list. The master camera
can store information for up to 10 remote cameras in slots [01]
through [10].
12
Highlight the desired slot and press 2.
Remote camera options will be displayed.
13
Highlight [Address] and press 2.
You will be prompted to enter an IP address.
382
Synchronized Release