Fine-Tuning White Balance - Nikon Z8 User Manual

Fine-Tuning White Balance

Each white balance option can be fine-tuned by up to six steps in either direction from the center
along both the A (amber)–B (blue) and G (green)–M (magenta) axes.
Using Buttons
1
Choose a white balance option by holding the U button and rotating a command dial.
2
Keeping the U button pressed, fine-tune white balance using the multi selector.
Use the multi selector to position the cursor on the grid. The
selected value is displayed to the right of the grid.
The A (amber)–B (blue) axis corresponds to color
temperature and is ruled in increments of 0.5. A change of 1
is equivalent to approximately 5 mired.
The G (green)–M (magenta) axis has effects similar to color
compensation filters and is ruled in increments of 0.25.
A change of 1 is equivalent to approximately 0.05 diffuse
density units.
3
Save changes.
The selected setting takes effect when the U button is released.
If white balance has been fine-tuned, an asterisk ("U") will
appear in the white balance icon.
148
White Balance