Nikon Z8 User Manual page 460

Synchronizing Camera Clocks
When the cameras are connected to the network using [Connect to other cameras] in the network
menu, the clocks on all cameras in the current group connected can be set to the time and date
reported by the master camera. Synchronization applies to all options in the setup menu [Time zone
and date] display.
1
Connect the cameras to the network using [Connect to other cameras] > [Network
settings] in the network menu.
For more information, see "Synchronized Release" (
2
On the master camera, select [Connect to other cameras],
then highlight [Synchronize date and time] and press 2.
Master camera clock settings will be displayed.
[Synchronize date and time] is not available on the remote
cameras.
[Synchronize date and time] will not be available if no
camera is connected to the network.
3
Press J.
The clocks on the remote cameras will be set to the date and time reported by the master
camera.
A message will be displayed when the process is complete.
Press J again to return to the [Connect to other cameras] display.
371).
0
386
Synchronizing Camera Clocks