Adjust The Angular Field Of View Using The Extra Optical Zoom Function - Panasonic WV-SFV311A Operating Instructions Manual

The back focus setting can be configured to automatically adjust the back focus and correct out of focus areas
when changing between color and black & white images.
The auto back focus function starts to automatically adjust back focus based on a subject located in the center
of the screen by clicking the [Execute] button.
[Focus]
The back focus can be adjusted manually.
•
[Near] button: Click this button to adjust the focus to the "Near" side.
•
[Reset] button: Click this button to reset the focus to the default.
•
[Far] button: Click this button to adjust the focus to the "Far" side.
[Adjusting method]
Select the back focus adjustment method upon switching between the color mode and the black & white mode.
•
Auto: Adjusts the back focus function automatically and corrects the focus when switching between color
and black & white images.
•
Preset: Performs the preset movement to each specified back focus position when switching between
color and black & white images. The preset position is the back focus position specified last time, which
was automatically memorized for each of color images and black & white images.
•
Fix: Fixes the position after adjusting the back focus either automatically or manually.
•
Default: Auto
[Close] button
Click this button to close the "Back focus" setup menu.
11.7 Adjust the angular field of view using the extra
optical zoom function
Click the [Setup>>] button of "Extra optical zoom" on the [Image quality] tab of the "Image/Audio" page.
(®page 86)
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 101