Panasonic WV-SFV311A Operating Instructions Manual page 186

17 Configure the settings relating to the schedules [Schedule]
•
VMD permission: The video motion detection (VMD) function will be active during the period of the
schedule.
•
Audio detection permission
The audio detection function will be active during the period of the schedule.
•
Access permission: Users whose access level is set to 2 and 3 on the [User auth.] tab
(®page 140) can access the camera only in the period of schedule.
•
H.264 recording(Recording stream 1): The SD recording will be performed at the designated time
in the schedule. Only available when H.264 images are used.
•
H.264 recording(Recording stream 2): The SD recording will be performed at the designated time
in the schedule. Only available when H.264 images are used.
•
Image adjust 1: Images are set to the image settings of "Scene file 1" at the designated time in the
schedule. When the designated time for the schedule finishes, images are set to the image settings of
"Scene file is not applied".
•
Image adjust 2: Images are set to the image settings of "Scene file 2" at the designated time in the
schedule. When the designated time for the schedule finishes, images are set to the image settings of
"Scene file is not applied".
•
FTP periodic image transmission: FTP periodic image transmission will be performed at the
designated time in the schedule.
Note
•
Select "On" for "User auth." on the [User auth.] tab of "User mng." page (®page 140) and "Off" for
"Host auth." on the "Host auth." page (®page 141) to validate "Access permission".
•
When selecting "H.264 recording(Recording stream 1)" or "H.264 recording(Recording stream
2)", select "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" for "Recording format" on the [SD
memory card] tab and select "Schedule" for "Save trigger". (®page 55)
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of "24h".
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
186 Operating Instructions
SFx311 SPN311 SPW311L SPN531 SPW531L SFN310
:
SPN310