11 Configure the settings relating to images and audio [Image/Audio]
It is possible to adjust the angular field of view using the extra optical zoom function.
•
: Click this button to adjust the zoom ratio to the "Wide" side.
•
: Click this button to set the zoom ratio to x1.0.
•
: Click this button to adjust the zoom ratio to the "Tele" side.
•
Note
•
When "2 mega pixel [16:9](30fps mode)
mode)" is selected for "Image capture mode", the maximum zoom ratio of the extra optical zoom
becomes x3.0.
•
When "2 mega pixel [4:3](30fps mode)" or "3 mega pixel [4:3](30fps mode)" is selected for "Image
capture mode", the maximum zoom ratio of the extra optical zoom becomes x2.5.
•
When "1.3 mega pixel [16:9](30fps mode)" or "1.3 mega pixel [16:9](60fps mode)" or "1.3 mega pixel
[4:3](30fps mode)" or "2 mega pixel [16:9](30fps mode)
mode", the maximum zoom ratio of the extra optical zoom becomes x2.0.
IMPORTANT
•
The positions will move out of alignment if extra optical zoom settings are configured when the mask
area (®page 96), privacy zone (®page 103), VMD area (®page 126), VIQS area (®page 107), or
cropping area (®page 137) is configured. To prevent this, perform the setting for the extra optical
zoom function before other settings.
102
Operating Instructions
: Click these buttons to adjust the horizontal/vertical position of the image after zooming.
SPN531
SPW531L
SPW532L
SFV311
" or "2 mega pixel [16:9](60fps
"is selected for "Image capture