Back Focus Setting ("Back Focus" Setup Menu); Spn311 Spn531 - Panasonic WV-SFV311A Operating Instructions Manual

11 Configure the settings relating to images and audio [Image/Audio]
–
locations where there is not much contrast such as a white wall
–
locations where the front cover often becomes dirty
–
when there is harsh flickering
•
When images in the near-infrared light area change from color to black & white, images may be out of
focus due to the nature of optical properties. In this case, the focus can automatically be corrected by
selecting "Auto" or "Preset" for "Adjusting method" (the focus will not automatically be adjusted
according to the illumination level change once the focus is corrected).
[Focus]
The focus can be adjusted manually.
•
[Near] button: Click this button to adjust the focus to the "Near" side.
•
[Reset] button: Click this button to reset the focus to the default.
•
[Far] button: Click this button to adjust the focus to the "Far" side.
[Adjusting method]
Select the focus adjustment method upon switching between the color mode and the black & white mode.
•
Auto: Adjusts the back focus function automatically and corrects the focus when switching between color
and black & white images.
•
Preset: Performs the preset movement to each specified back focus position when switching between
color and black & white images. The preset position is the back focus position specified last time, which
was automatically memorized for each of color images and black & white images.
•
Preset: Performs the preset movement to each specified focus position when switching between color and
black & white images. The preset position is the focus position specified last time, which was automatically
memorized for each of color images and black & white images.
•
Fix: Fixes the position after adjusting the focus either automatically or manually.
•
Default: Auto
[Close] button
Click this button to close the "Focus" setup menu.

11.6 Back focus setting ("Back focus" setup menu)

SPN311 SPN531
Click the [Setup>>] button of "Back focus" on the [Image quality] tab of the "Image/Audio" page.
Adjust the back focus by moving the MOS image sensor of the camera to the appropriate position. Manual and
auto adjustment are available.
100 Operating Instructions
SFx311 SPW311L SPW312L SPW531L SPW532L SPN531 SPN311