Playback "H.264(1)"/"H.264(2)"/"H.264(3)"/"H.264(4)" Images Saved To The Sd Memory Card - Panasonic WV-SFV311A Operating Instructions Manual

Hide thumbs Also See for WV-SFV311A:
Table of Contents

Advertisement

7 Playback of images on the SD memory card
7.2 Playback "H.264(1)"/"H.264(2)"/"H.264(3)"/"H.
264(4)" images saved to the SD memory card
IMPORTANT
Depending on the network environment, download of video data may fail.
Slider bar
By operating the slider bar, you can select where to start playing images from. The slider bar can only be
used before playing images, or when playing is paused or stopped.
[PAUSE] button
Playback will be paused when this button is clicked during playback.
[PLAY] button
When this button is clicked, recorded data will be played.
Note
If audio is recorded, it can be played back, but the image and audio will not be synchronized. Therefore,
images and audio may not always match. When data is being recorded to the SD memory card, audio
may sound as if it is cutting out and the audio quality may be reduced.
When recorded audio is played back, the refresh interval of live images and playback may become
slow.
Recorded audio is not played back when "Off" or "Interactive(Half-duplex)" is selected for "Audio
mode" on the [Audio] tab of the "Image/Audio" page.
Audio is only played for users who belong to the access level selected for "Permission level of audio
trans./recep." on the [Audio] tab of the "Image/Audio" page.
[FF] button
Each time this button is clicked, the playback speed will change. When the [PLAY] button is clicked during fast
playback, playback speed will return to the normal playback speed.
38
Operating Instructions
A

Advertisement

Table of Contents
loading

Table of Contents