Charging The Battery; Inserting And Removing The Battery; On/Off Trigger - Westfalia Smartworks AS 10,8 LI ECO Original Instructions Manual

Charging the Battery

The rechargeable battery must be charged before the first use. Only
recharge the battery once it is has been fully discharged, i.e. the power
clearly decreases. Otherwise the battery may not achieve its full
capacity. Important! Only use the provided charger to charge the
battery.
1. Connect the charger to the power mains and insert the plug of the
charger into the charging socket (8) on the top side of the battery.
The red LED on the charger turns on and indicates that the battery is
charged.
2. While charging, the battery and the charger become lightly warm.
After charging is complete the LED on the charger turns green on to
show that the battery is fully charged. Charging process takes ap-
prox. 3 to 5 hours.
3. Remove the battery from the charger and unplug from power mains.

Inserting and Removing the Battery

1. Insert the battery into the slot of the screwdriver. Do not apply force
when inserting the battery into the slot. Iserting can be achieveed
easily and without resistance.
2. The battery must be inserted completely until the battery release
button (7) automatically audibly lock into place. To remove the
battery, press the battery release button and pull out the battery.

ON/OFF Trigger

1. Press the ON/OFF trigger (5) to start the screwdriver. Release the
trigger to switch off the screwdriver. The rotation speed can be
varied by pressing the ON/OFF trigger. The more the trigger is
pressed, the faster the rotation speed will be.
2. The rotating direction slider (6) can only be moved when the
ON/OFF trigger has been released. Use the rotating direction button
to switch between clockwise and counter clockwise rotation. With
the rotation direction button in the central position the trigger is
locked and cannot be pressed. Use this position before you put
down the screwdriver, to avoid unintentional starting.
3. Important! The screwdriver has to come to a complete stop before
the rotating direction button can be used, otherwise the screwdriver
Operation
9