Intended Use; Before First Use; Charging The Battery - Westfalia 82 74 00 Instruction Manual

Intended Use

 The cordless screwdriver has been developed for private use and is not
designed for the demands of industrial use.
 The machine is intended for driving in and loosening screws as well as for
drilling in wood, metal, ceramic and plastic.
 The intended use also includes an operation following the operating
instructions. Any use beyond these parameters (different media, applying
force) or any changes (reconstruction, no original accessory) can lead to
serious risks and is regarded as use that is contrary to the intended pur-
pose. The operator is liable for any damage caused by improper use.

Before first Use

 Remove the cordless screwdriver and all accessories out of the packaging.
Check all parts for damage in transit and do not use damaged accessory or
a damaged tool.
 Keep packaging materials out of reach of children. There is risk of
suffocation!

Charging the Battery

Charge the battery before first use. With the quick charger (11) it will take
approx. 1 hour to charge the battery.
In contrast to Ni-Cd or Ni-MH batteries Lithium-ion batteries do not have a
memory effect. The capacity of other batteries decreases steadily but the
capacity of Lithium-ion batteries does not decrease. The capacity remains
constant until the electronics interrupt discharging. The cordless screwdriver
will stop abruptly, if the charging level of the battery falls below a certain value.
Regardless of the charging condition, the battery can be charged at any time
without damaging the cells.
1. Connect the power cord of the charger
(11) with a wall socket. The green power
LED (13) lights up.
2. Slide the battery (7) as far as it will go
into the charger, as shown on the right
picture.
3. The red charging LED (12) lights up and
indicates that the battery is charged.
Operating
15