Charging The Battery; Ion/Off Trigger; Inserting The Tool Bits; Maintenance And Cleaning - Westfalia 87 56 84 Original Instructions Manual

Charging the Battery

The rechargeable battery must be fully charged before the first use.
The screwdriver cannot be operated while charging is in process.
1. Connect the unit to the charger or any USB socket via the charging
socket (5). The charging indicator lights up blue and indicates that
the battery is charged.
2. While charging, the battery and the quick charger become lightly
warm. After the charging process the blue indicator LED flashes
slowly to show that the battery is fully charged. Charging process
takes approx. 3 - 5 hours.
3. Remove the unit from the charger or the USB socket.
ON/OFF Trigger
1. Press the ON/OFF trigger (4) to start the screwdriver. Release the
trigger to switch off the screwdriver.
2. The rotating direction button (6) can only be pressed when the
ON/OFF trigger has been released. Use the rotating direction button
to switch between clockwise and counter clockwise rotation.
With the rotation direction button in the central position the trigger is
without function, only the work LED (3) will be activated. The rotating
direction indicators (8) indicate the direction (front = clockwise,
back = counter clockwise).

Inserting the Tool Bits

1. Simply insert the tool bits into the tool bit socket (2).
Work LED
When pressing the ON/OFF trigger the work LED (3) turns on.

Maintenance and Cleaning

 Use only a moist cloth to clean the unit. Do not use aggressive
chemicals which may dissolve plastic parts, or abrasives. Always
keep the ventilation slots clean and free from obstructions.
 The screwdriver is maintenance-free.
Operation
7