Worx WX667.1 Safety And Operating Manual Original Instructions page 10

APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Sawing
Sanding
10
Rasping
Removing
grout
Scraping
We recommend that you purchase your accessories listed in the above list from the same store that sold
you the tool. Use good quality accessories marked with a well-known brand name. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw
blade, rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Oscillating Tool
Pic
Universal Metal/Wood End Cut Blade
Standard Wood End Cut Blade
Precision Wood Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger Shaped)
Carbide Grit Semicircle Saw Blade
Diamond-Coated Semicircle Saw
Blade
Rigid Scraper Blade
Flexible Scraper Blade
Description
WX667 WX667.1
Application
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers.
Wood, plastic, drywall.
Wood, soft plastics.
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet
metal, hardened fillers, window
glazing.
Wood, plastic, hardened fillers.
Wood, plastic, hardened fillers.
Wood, hardened adhesives, thin
set, masonry.
Wood, hardened adhesives, thin
set, masonry.
Grout, porous concrete, masonry.
Ceramic and stone tile,
backerboard.
Old paint, hardened adhesives,
caulk, carpet.
Elastic sealants, paint, adhesive
residues, carpet.