Hyperlock Accessory clAMping lever on/off sWiTcH vAriAble speed diAl venTing sloTs UniversAl fiT Accessory inTerfAce * sMAller flAnge for oTHer brAnds’ sAnding pAds flAnge *Works with other oscillating tool brands’ accessories. The following compatible brands are trademarks owned by third parties which may be registered by their respective owners: bosch , black &...
GENERAL POwER TOOL electric shock. f) if operating a power tool in a damp SAFETY wARNINGS location is unavoidable, use a residual current device (rcd) protected WArning: read all safety warnings supply. Use of an RCD reduces the risk of and all instructions.
Page 7
4) poWer Tool Use And cAre b) Use power tools only with specifically designated battery packs. a) do not force the power tool. Use the correct power tool for your Use of any other battery packs may create application. The correct power tool will a risk of injury and fire.
Page 8
SAFETY wARNINGS FOR n) recharge only with the charger specified by WorX. Do not use any bATTERY PACk charger other than that specifically provided for use with the equipment. A a) do not dismantle, open or shred cells charger that is suitable for one type of or battery pack.
Page 9
SYMbOLS WARNING–To reduce the Wear protective gloves risk of injury, user must read instruction manual High oscillation frequency. Warning Low oscillation frequency. Wear ear protection LED light is a battery capacity indicator and will flash when Wear eye protection power gets low. C-tick marking Wear dust mask Do not dispose of batteries.
OPERATING INSTRUCTIONS DISPOSAL OF AN EXHAUSTED bATTERY PACk noTe: Before using the tool, read the instruction book carefully. To preserve natural resources, please recycle or dispose of the battery pack inTended Use: properly. This battery pack contains The power tool is intended for sawing and Lithium batteries.
Page 11
tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. APPLICATION WArning: The sawing teeth are very sharp.
Page 12
Old paint, hardened Rigid Scraper Blade adhesives, caulk, carpet scraping Elastic sealants, paint, Flexible Scraper Blade adhesive residues, carpet We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Refer to the accessory packaging for further details.
Need help?
Do you have a question about the Sonicrafter WX678 and is the answer not in the manual?
Questions and answers