Worx WX667.1 Safety And Operating Manual Original Instructions

Worx WX667.1 Safety And Operating Manual Original Instructions

Oscillating tool

Advertisement

Quick Links

SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
Oscillating Tool
WX667 WX667.1

Advertisement

Table of Contents
loading

Summary of Contents for Worx WX667.1

  • Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Oscillating Tool WX667 WX667.1...
  • Page 6: Technical Data

    TECHNICAL DATA ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any Type Designation WX667 WX667.1(6- anti vibration accessories are used. designation of machinery, representative of And the tool is being used as intended by its design sonicrafter) and these instructions.
  • Page 7: General Power Tool Safety Warnings

    Use e) When operating a power tool of these devices can reduce dust-related outdoors, use an extension cord hazards. suitable for outdoor use. Use of a cord Oscillating Tool WX667 WX667.1...
  • Page 8 5. SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Oscillating Tool WX667 WX667.1...
  • Page 9: Assembly And Operation

    Avoid danger of injury from the sharp edges of the accessories. Accessories can become very hot while working, presenting danger of burns! Make sure the tool is unplugged prior to changing accessories. Wear protective gloves High oscillation frequency Low oscillation frequency Oscillating Tool WX667 WX667.1...
  • Page 10 The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade, rotate it and retighten firmly. Cut/Sand with a constant movement and light pressure. Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster. Oscillating Tool WX667 WX667.1...
  • Page 11: Working Hints For Your Tool

    Occasionally you Description WORX Sonicrafter ® may see sparks through the ventilation slots. This is Type WX667 WX667.1(6-designation of normal and will not damage your power tool. machinery, representative of Sonicrafter) If the supply cord is damaged, it must be replaced...
  • Page 12 Copyright © 2016, Positec. All Rights Reserved. AR01137602...

This manual is also suitable for:

Wx667

Table of Contents