Transport And Installation; Ambient Conditions - EWM TIG 17 GD Operating Instructions Manual

5.3

Transport and installation

Risk of accidents due to supply lines!
During transport, attached supply lines (mains leads, control cables, etc.) can cause
risks, e.g. by causing connected machines to tip over and injure persons!
• Disconnect all supply lines before transport!
5.3.1

Ambient conditions

Equipment damage due to contamination!
Unusually high amounts of dust, acids, corrosive gases or substances can damage the machine
(observe maintenance intervals > see 6.2 chapter).
• Avoid large amounts of smoke, steam, oily fumes, grinding dust and corrosive ambient air!
In operation
Temperature range of the ambient air:
• -10 °C to +40 °C (-13 F to 104 F)
Relative humidity:
• up to 50 % at 40 °C (104 F)
• up to 90 % at 20 °C (68 F)
Transport and storage
Storage in a closed area, temperature range of the ambient air:
• -25 °C to +55 °C (-13 F to 131 F)
Relative humidity
• up to 90 % at 20 °C (68 F)
Ambient temperature dependent on coolant! Observe the coolant temperature range of the torch coo-
[1]
ling
099-011623-EW501
21.03.2023
CAUTION
[1]
[1]
Design and function
Transport and installation
19