Table of Contents
Advertisement
An alternative anti-tipping
mechanism
If it is not possible to fix the anti-tipping
mechanisms securely to the floor of the
niche, the appliance can be secured at
the top using a wooden beam. If this
method is used, then there must not be
any gap between the appliance and the
wooden beam.
– The wooden beam must be at least
75 mm x 100 mm thick.
– The length must be the same as the
width of the building-in niche.
– If the building-in niche is deeper than
the appliance, a thicker wooden
beam should be used.
– The wood must cover the appliance
to a depth of at least 50.8 mm (see
diagram).
All manuals and user guides at all-guides.com
^ Mark the position of the lower edge of
^ Select screws of a length depending
^ Check where the upright wall
^ First, drill the holes in the wooden
^ Secure the wooden beam to the back
the wooden beam on the rear wall of
the niche.
on the thickness of the wood.
Use the number of screws
appropriate to the housing width to
ensure that the wooden beam is
securely fixed.
supports are in the back of the niche,
and mark the drill holes in the
wooden beam accordingly.
beam.
wall of the niche.
Installation
59
Advertisement
Table of Contents
