Table of Contents
Advertisement
Installation
Stainless steel fronts
Stainless steel fronts and plinth grilles
with a stainless steel look are available
from your Miele Chartered Agent or
from Miele.
Weight of the door fronts
Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted.
Appliance
K 1801 Vi, K 1811 Vi
K 1901 Vi, K 1911 Vi
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
54
All manuals and user guides at all-guides.com
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
Max.
above before the appliance is placed in
weight
the niche.
of furniture
The size of the side panel must match
door front
that of the furniture panel opposite.
in kg
50
37
Advertisement
Table of Contents
