Table of Contents
Advertisement
^ Use a screwdriver or similar to turn
the pin so that the slot in the head is
horizontal a.
^ Raise the snap fittings on both sides
b, and lift the MasterFresh drawer
up and out.
To avoid damaging the telescopic
runners, make sure that they are
pushed back into the appliance.
To replace the drawer
^ Pull the telescopic rails out as far as
they will go.
^ Place the MasterFresh drawer on the
rails so that it engages at the back
and front.
^ Turn the slot on the pin to its vertical
position.
^ Push the MasterFresh drawer all the
way back into the appliance.
All manuals and user guides at all-guides.com
Arranging the interior fittings
Adjusting the door
shelves/bottle shelf
^ Hold the door shelf by its frame with
^ Slide the shelf in its angled frame up
^ Make sure that the shelf is straight.
both hands, raise it a little and then
tip it forwards slightly.
or down in the side runners as
required, and engage it in its new
position.
33
Advertisement
Table of Contents
