Weight Of The Door Fronts; Building Into A Peninsular Run; Building-In At The End Of A Run Of Units - Miele KF 1801 Vi Operating And Installation Instructions

Installation
Stainless steel fronts
Stainless steel fronts and plinth grilles
with a stainless steel look are available
from Miele.

Weight of the door fronts

Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted.
Appliance
KF 1801 Vi,
KF 1811 Vi
KF 1901 Vi,
KF 1911 Vi
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
78
max. max.
weight weight
of upper of lower
furniture furniture
door in kg door in kg
47 10
38 14

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
The size of the side panel must match
that of the furniture panel opposite.