Table of Contents
Advertisement
TouchPad
Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the TouchPad:
1.
Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is attached, and then
disconnect the TouchPad cable from the system board.
2.
Remove the five Phillips PM1.5×2.3 screws (2) that secure the TouchPad to the top cover.
Bottom cover on page
Battery on page
21).
19).
Spare part number
833715-001
TouchPad
27
Advertisement
Table of Contents
