Starting-Up; Pan Detection; Residual Heat Indication - Philco PHD 451B Owner's Manual

Starting-up

You must first switching on the hob, then the heating zone:
· Start-up/ switch off the hob:
Action
To start
To stop
· Start-up/ switch off a heating zone:
Action
To choice the zone
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
· If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case it is
impossible to increase the power and the display shows [ U ]. This symbol disappears when a pan is put
on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display shows [ U ]. The symbol
·
[ U ] disappears when the pan is put back to the heating zone. The cooking continues with the power
level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still hot and
indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.
EN - 10
Copyright © 2019, Fast ČR, a. s.
Control panel
Press key [ 0/l ]
Press key [ 0/l ]
Control panel
Press display [ 0 ] selected
Slide on the "SLIDER" to the right
or to the left
Slide to [ 0 ] on the "SLIDER" or
press on [ 0 ]
Display
[ 0 ] are blinking
Nothing or [ H ]
Display
[ 0 ] and control light on
[ 1 ] to [ 9 ]
[ 0 ] or [ H ]
Revision 08/2019