Table of Contents
Advertisement
Chapter 8 Connecting to External Devices — Connection function via the USB terminal
To disconnect USB cable safely
∫ For Windows
1
On the screen of the computer, select the
"HC-X2000", etc.)
≥ Depending on your computer's settings, this icon may not be displayed.
∫ For Mac
1
Move the icon of the volume name of the memory card (for example: "A001", etc.) displayed on the desktop to [Trash], then
disconnect the USB cable.
About the screen indication of the unit
≥ The card 1 access lamp or card 2 access lamp flashes while this unit is being accessed. Do not disconnect the USB cable, battery, or AC adaptor
while the unit is being accessed.
≥ If the screen does not change when the unit is operated while connected to a computer, disconnect the battery and/or AC adaptor, wait
approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the memory card.)
Operating environment (mass storage)
≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computer's cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
∫ For Windows
OS
CPU
RAM
Interface
Other requirements
∫ For Mac
OS
CPU
RAM
Interface
Other requirements
icon in the task tray, then deselect the model number of this unit. (For example:
Windows 10 (32 bit/64 bit)
Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) (SP1)
1 GHz or higher
32 bit (86) or 64 bit (64) processor
2 GB or more (64 bit)/1 GB or more (32 bit)
USB port
Mouse or equivalent pointing device
macOS v10.15
Intel Core 2 Duo or better
2 GB or more
USB port
Mouse or equivalent pointing device
- 170 -
Advertisement
Table of Contents
