Panasonic HC-X2050 Operating Instructions Manual page 207

Firmware Ver. 1.4 — Support for Simultaneous Output from <SDI OUT> Terminal and <HDMI> Terminal [X2000]/[X2050]
Notes on the composition of the [VIDEO OUT SEL], [SDI OUT], and [HDMI OUT] menus
The compositions of the [VIDEO OUT SEL], [SDI OUT], and [HDMI OUT] menus have changed as follows:
∫ [VIDEO OUT/LCD/VF] menu
[VIDEO OUT SEL] [SDI + HDMI OUTPUT]
[EXTERNAL OUT SEL]
[SDI OUT FORMAT]
[HDMI OUT FORMAT]
[LCD/VF OUTPUT]
[SDI SETTING] [SDI AUDIO GAIN CHG]
[SDI REC REMOTE]
[SDI OUT CHAR]
[SDI OUT ZEBRA]
[HDMI SETTING] [HDMI TC OUT]
[HDMI REC REMOTE]
[HDMI OUT CHAR]
[HDMI OUT ZEBRA]
Notes on the FUNCTION screen in mode check
There have been changes to the FUNCTION screen in mode check.
∫ FUNCTION screen
Item
[VIDEO OUT]
[CARD STATUS]
Item
[VIDEO OUT SEL] Displays the external output destination.
≥ [SDI+HDMI]:
≥ [SDI]:
≥ [HDMI]:
[SDI OUT FORMAT] Displays with [19201080p]/[19201080i]/[19201080PsF]/[1280720p] the signals output
through the <SDI OUT> terminal.
[SDI OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <SDI OUT> terminal are
superimposed.
[HDMI OUT FORMAT] Displays with [38402160p]/[38402160p(420/8bit)]/[19201080p]/[19201080i]/[1280720p]/
[720480p]/[720576p] the signals output through the <HDMI> terminal.
[HDMI OUT CHAR] Displays with [ON]/[OFF] whether the characters output through the <HDMI> terminal are
superimposed.
— Displays the status, remaining recording capacity, and the total capacity of the memory card
inserted in the card slot.
The status of the memory card that is displayed are following types.
≥ [NO CARD]: Memory card is not inserted.
≥ [UNSUPPORTED]: Memory card is not supported.
≥ [FORMAT ERROR]: Memory card cannot be used. (Format error)
≥ [PROTECTED]: It is write protected. (The write-protection switch of the memory card is set to
≥ [NO REMAIN]: There is no remaining recording capacity.
≥ [NOT SDXC]: SDXC memory card is not inserted in the MOV recording/MP4 recording.
≥ Cases other than above: The remaining recording capacity is displayed in 0% through 100%.
[TOTAL] Displays the remaining recording capacity/total capacity of the memory cards in the card slot 1
and the card slot 2.
[SLOT1] Displays the status and remaining recording capacity/total capacity of the memory card in card
slot 1.
[SLOT2] Displays the status and remaining recording capacity/total capacity of the memory card in card
slot 2.
When [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [SDI + HDMI OUTPUT] is set to
[ON]
When [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [EXTERNAL OUT SEL] is set to
[SDI]
When [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL]  [EXTERNAL OUT SEL] is set to
[HDMI]
the LOCK side)
- F 6 -
Description