Panasonic HC-X2050 Operating Instructions Manual page 75

@
NOTE
0 For the combinations that can be set, refer to "Format that can be output from the <SDI OUT> terminal [X2000]/[X2050]". ( l 156)
[SDI AUDIO GAIN CHG]
Adjusts the gain for the audio signal output from the <SDI OUT> terminal.
The items that can be set are as follows.
≥ [0dB], [j6dB], [j8dB]
(Factory setting: [j8dB])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
@ NOTE
0 This cannot be set when the [RECORDING] menu  [REC FUNCTION]  [REC MODE] is set to [INTERVAL].
0 The AUTO REC signal is compatible with TYPE3 when remotely recording with SDI.
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT> terminal.
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT> terminal. The settings of the zebra signal follow the zebra signal settings
in the [VIDEO OUT/LCD/VF] menu  [EI ASSIST].
[ON]
[OFF]
(Factory setting: [OFF])
[HDMI OUT]
¥ Set the [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL] to [HDMI].
[OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu  [FREQUENCY]/[FILE
FORMAT]/[REC FORMAT] setting.
[38402160p]
[38402160p(420/8bit)]
[19201080p]
[19201080i]
[1280720p]
[720480p]
[720576p]
(Factory setting: [19201080p])
@ NOTE
0 For the combinations that can be set, refer to "Format that can be output from the <HDMI> terminal". (l 157)
[HDMI TC OUT]
Sets if the time code information is output or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can be
set when [HDMI TC OUT] in [HDMI OUT] is enabled.
[ON]
[OFF]
(Factory setting: [OFF])
@ NOTE
0 This cannot be set when the [RECORDING] menu  [REC FUNCTION]  [REC MODE] is set to [INTERVAL].
Chapter 4 Operation — Menu settings
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
Outputs in 38402160p (4:2:2/10 bit).
Outputs in 38402160p (4:2:0/8 bit).
Outputs in 19201080p.
Outputs in 19201080i.
Outputs in 1280720p.
Outputs in 720480p.
Outputs in 720576p.
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
- 75 -