Table of Contents
Advertisement
Attaching the handle unit ([X2000]/[X2050] supplied, [X1500] optional)
¥ Press the power button to turn off the unit. (l 36)
1
Open the microphone holder.
Open buckle 1, and detach fitting 2 from hook 3.
2
Attach the microphone holder to the microphone holder mounting section on the
handle unit.
≥ Attach using a commercially-available screwdriver.
≥ There will be some rubbing noises with the rubber when screwing in the microphone holder
mounting screws, but please ensure they are done up tightly.
Microphone holder
1
Microphone holder mounting screws
2
3
Push the handle unit into the handle unit mounting section on the camera.
Match the positions of mounting mark A on the handle unit and mounting mark B on the
camera when pushing in.
4
Slide the handle unit in the direction indicated by the arrow.
Slide up to mounting mark C.
Chapter 3 Preparation — Attaching accessories
- 32 -
Advertisement
Table of Contents
