Quantum TC2201E User Manual page 162

Perform Configuration
Table 46 Trace
Settings, Page 5
X.XX.XXXX
0) LSCSI - Driver
1) LSCSI - Transport
2) LSCSI - Management
A) Set All Trace Levels
U) Update Current Operating Trace Levels
X) Return to previous menu
Enter the trace level index, <enter> for next page >
142
Trace Settings
XXXXXX
07/26/2005
If the Enter key is selected, the first page of trace settings will appear
again.
Enter a level number from the Trace Settings that are shown.
Select U to update current operating trace levels. This option forces the
currently displayed trace settings to become effective immediately,
without requiring a reboot or power cycle.
Be sure to set the clock and date in the Real Time Clock
Note:
Configuration menu so trace logging is accurate.
Quantum TC2201E User's Guide
XXXXXXXXXXXXXX
08:56:22
(LSD) :
(LST) :
(LSM) :
0 - Minimum
0 - Minimum
0 - Minimum