Figure 1 Travan Portable Usb Tape Drive; Figure 2 Connecting A Power Adapter - Quantum Travan 20GB User Manual

Figure 1 Travan
Portable USB Tape
Drive
Figure 2 Connecting a
Power Adapter
3 Set up the drive
As shown in figure
operate in a horizontal position (with the label facing down) or in a
vertical position (supported by the drive stand, with the label facing
to the left). When mounting the drive in the drive stand, make sure
that the two tabs in the drive stand lock into the two slots in the side
of the drive. Do not move the drive while it is running.
4 Connect the power adapter to the drive
Make sure the drive is turned off. Attach the small, round power
connector to the tape drive, see
cord into the transformer and then plug the other end into a wall
socket or power strip.
Travan Portable USB Tape Drive User's Guide
Chapter 1 Introduction and Installation
1, the Travan Portable USB Tape Drive can
figure 2. Plug one end of the power
Installing the Drive
3