Quantum Travan 20GB User Manual page 18

Chapter 1 Introduction and Installation
Installing the Drive
6
2 Select the
3 Click on the
tape drive is listed.
Driver for Windows 2000
If you are running Windows 2000, after Windows finds the plug
a
and play device, the
.
Next
Insert the Certance Resource CD, if not already inserted, into
b
your CD-ROM drive. If it autoruns, click the
In "Install Hardware Device Drivers," select
c
driver for my device (recommended)
In
d
Locate Device Drivers
uncheck the other boxes. Click
In
e
Driver Files Search Results
driver for this device. ...\tw157.inf.
In
f
Completing the Found New Hardware Wizard
The wizard has finished installing the software for: USB tape drive
Click
(QIC-157).
Go into the Windows Device Manager (from the Control Panel,
g
double-click on
on the
Device Manager
listed.
8 Remove the Certance Resource CD from your CD-ROM drive and
insert the TapeWare CD
Follow the instructions to install TapeWare.
Congratulations! Your new Travan Portaboe USB tape drive is now
ready to run a backup, see
instructions on using your backup software, see the online manual that
came with the software.
If you have difficulties with the installation, see
Note:
Troubleshooting.
Travan Portable USB Tape Drive User's Guide
tab
Hardware
button) to make sure that the
Device Manager
Found New Hardware
, then click
check the
CD-ROM drives
.
Next
you should see:
Click
.
Finish
, then select the
System
button) to make sure that the tape drive is
chapter 2, Operation and
wizard will open. Click
button.
Exit
Search for a suitable
.
Next
box and
Windows found a
.
Next
you should see
tab, then click
Hardware
Maintenance. For
chapter 3,