Advertisement
Troubleshooting
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Haier authorized service technician.
PROBLEM
Dryer stops
working mid-cycle.
Dryer is taking too
long/results were
not satisfactory.
Clothes getting too
hot or damaged.
Noises / vibration.
Creasing.
Linting.
Indicator light
flashes rapidly
TROUBLESHOOTING
POSSIBLE CAUSES
Power failure.
Dryer has been paused.
Dryer door is open.
Drying cycle selected not
appropriate for the load.
Dryer overloaded for the cycle.
Lint filter is blocked.
Load overly wet at the start of
cycle.
Cycle selected not appropriate
for the load.
Items removed from dryer before
the end of cycle cool down had
finished.
Instructions on care label not
followed.
Used a 'Time Dry' cycle and did
not monitor the dryness of clothes
during the cycle.
Dryer is not installed on a stable
surface.
Dryer is overloaded.
Dryer is overloaded.
Lint filter not cleaned or replaced.
Dryer door is open.
A fault occurs
WHAT TO DO
Check the power supply and restart the
desired cycle.
Touch the 'Start / Pause' button to restart
the cycle.
Ensure the door is firmly shut.
Select an appropriate cycle for the load.
Do not overload your dryer. Try dividing
the load in half and dry half at a time.
Clean the lint filter.
Remove more water from the load before
placing it in the dryer, eg select a faster
spin on your washer, a speed appropriate
for your load.
Ensure the clothes are appropriate for the
cycle selected.
Removing items before cool down may
damage clothing if it is not spread out and
exposed to cooler air once removed from
the dryer.
Follow the instructions on the care label of
the items.
Ensure that clothes are checked for
dryness during the cycle when using the
timed programmes to avoid over drying.
Ensure the dryer is installed on a flat,
stable surface.
Remove some items from the dryer.
Remove some items from the dryer.
Ensure the lint filter is cleaned after every
cycle and replaced correctly.
Ensure the door is firmly shut.
Contact your Haier authorized service
technician.
15
Advertisement
