Advertisement
INSTALLATION INSTRUCTIONS
Free standing
The dryer stands on the floor and can easily be moved into position.
1 Move the dryer into the desired position. Do not
lift the dryer by the top panel.
2 Have a minimum clearance on all sides of at
least 20mm.
3 Have a minimum clearance at the rear of 75mm.
4 Install the dryer on a stable and level floor.
IMPORTANT!
Do not put the heavy loads on the top of your dryer,
eg the wet clothes that were taken out of the washing machine.
Before a rear venting option is installed the dryer must be changed from the front
venting factory setup. Remove the outlet grille from the front left-hand side and
replace with the outlet cover from the rear left-hand side. These covers should be
gently pried at the sides to prevent damage.
Outlet cover
Outlet grille
8
Suitable for
Prohibited for
Cotton
Jeans
Downy
Synthetic
Sports
Wool
Mix
Shirt
Silk
7kg
Advertisement
