Advertisement
Available languages
Available languages
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Haier Repairer.
PROBLEM
Pressing 'Power'
does not turn
on the dryer.
Pressing
'Start / Pause'
does not start the
drying cycle.
Dryer keeps
stopping and
starting.
Dryer stops
working mid-cycle.
Dryer is taking too
long/results were
not satisfactory.
Clothes getting too
hot or damaged.
TROUBLESHOOTING
POSSIBLE CAUSES
Fault with household power
supply.
Dryer could be displaying a user
warning or fault code.
'Delay' function is set.
The 'Anti-crease' option has
been selected.
Power failure.
Dryer has been paused.
Dryer door is open.
Drying cycle selected not
appropriate for the load.
Selected drying temp, not
appropriate for the load.
Dryer overloaded for the cycle.
Lint filter is blocked.
Load overly wet at the start of
cycle.
Cycle selected not appropriate
for the load.
Items removed from dryer before
the end of cycle cool down had
finished.
WHAT TO DO
Try plugging in and turning on another
electrical appliance.
Refer to page 17.
Refer to page 15 for more information.
Refer to page 15 for more information.
Press 'Power' and restart the desired
cycle.
Press the 'Start / Pause' button to restart
the cycle.
Ensure the door is firmly shut.
Select an appropriate cycle for the load.
Refer to pages 13, 14 and 15.
Select a higher drying temp. Refer to
page 15.
Some cycles have a lower max. load size.
Refer to page 13.
Try dividing the load in half and dry
half at a time.
Clean the lint filter.
Remove more water from the load before
placing it in the dryer, eg select a faster
spin on your washer, a speed appropriate
for your load.
Ensure the cycle selected is appropriate
for items in the load.
Refer to pages 13 and 15.
Removing items before cool down may
damage clothing if it is not spread out and
exposed to cooler air once removed from
the dryer.
18
Advertisement
