Quantum Scalar i500 Reference Manual page 139

blHPFMapActivePort
}
blHPFMapVirtualPort
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The virtual port index. The value is usually the same
as the physical port index, but will be zero if HPF
is not configured."
::= { blHPFMapEntry 1 }
blHPFMapPrimaryPort
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The physical port index that acts as the
::= { blHPFMapEntry 2 }
blHPFMapStandbyList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(256))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The comma seperated list of ports that are
::= { blHPFMapEntry 3 }
blHPFMapActivePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The physical port that is active on this virtual port"
::= { blHPFMapEntry 4 }
Scalar i500 Basic SNMP Reference Guide
-- Comma seperated list of standby Ports
INTEGER
OBJECT-TYPE
OBJECT-TYPE
default standby"
configured as standbys for the virtual port
(excluding the primary port)."
-- The port index of the active port
133