Unpacking the Rackmount Kit
Refer to the illustration below while performing the steps that follow:
1. Open the shipping carton and remove the square cardboard tube from the inner tray. Set the cardboard tube on the work
surface.
2. Remove the inner tray from the carton and set it on the work surface.
3. Remove the support box from the carton by lifting the foam support braces out.
4. Remove the foam braces from the support box.
5. Pull the plastic bag off the support box and place the box on the work surface.
6. Remove the square cardboard tube from the inner tray, open it and place the contents on the work surface.
7. Remove the bubble-wrapped package from the inner tray; open it and place the rack mount brackets on the work surface.
8. Remove the bag of hardware from the inner tray, open it and place the contents on the work surface.
2
FastStor Rack Mount Installation Instructions
62-0125-01