Epson Home Cinema 5050UBe User Manual page 150

Power light Status light
Off Flashing blue
Blue Varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Lamp light Temp light
Orange Off
Flashing Off
orange
Off Flashing
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Off
orange
150
Status and solution
Lamp has a problem
• Check the Lamp Hours in the Info
menu to see if the lamp is burned
out. Unplug the projector, wait for
the lamp to cool down, and check if
it is broken or installed incorrectly;
reseat or replace the lamp as
necessary
• Clean or replace the air filter
• Make sure the lamp cover is closed
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Replace the lamp soon to avoid
damage; do not continue using the
projector
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Auto Iris or Cinema Filter error; turn
the projector off, unplug it, and
contact Epson for help
Power error; turn the projector off,
unplug it, and contact Epson for help
Internal projector error; turn the
projector off, unplug it, and contact
Epson for help