Solutions When A 3D Image Does Not Display Correctly - Epson Home Cinema 5050UBe User Manual

• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
• If the image has been progressively darkening, you may need to replace the projector lamp soon.
Parent topic:
Related references
Image Quality Settings - Image Menu
Projector Setup Settings - Extended Menu

Solutions When a 3D Image Does Not Display Correctly

If a 3D image does not display correctly, try the following solutions:
• Make sure the 3D Display setting on the Signal menu is set to Auto or 3D.
• Make sure your video device and media are both 3D-compatible. Refer to the documentation that
came with your video device for more information.
• Make sure you are using an HDMI cable that supports 3D signals.
• Make sure you selected the correct 3D Format setting on the Signal menu. Normally this should be
set to Auto, but in some cases you may need to select a different setting to match the 3D signal from
your video device.
• Make sure you are using RF 3D active shutter glasses. You can purchase them from Epson.
• Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby
mode, slide the power switch on the glasses to the Off position and then back to the On position.
• Make sure your 3D glasses are paired with the projector.
• Adjust the 3D Depth setting on the Signal menu.
• Make sure you are within the 3D viewing range.
• To minimize 3D crosstalk, reduce the brightness of 3D images by selecting the following settings:
• Color Mode: 3D Cinema
• 3D Brightness: Low
• 3D Depth: 0
• HDMI Video Range: Normal
• Make sure your screen size matches the Diagonal Screen Size setting on the Signal menu.
Solving Image Problems
157